Nimh New 16340 3.85v 202 2a 18650 Price Liitokala 3.7v Lii-402 1.2v 100 3.2v Aa/aaa Jaeda Quinton Rating: 4.1 out of 5
Send list:
1.Lii402 charger Shipping list：402 Charger +5V 2A Charger +2A USB cable +manual
2.Lii202 charger Shipping list：202 Charger + 5V 2A Charger+2A USB cable + manual
3.Lii100 charger Shipping list：100 Charger +5V 2A Charger +1A USB cable + manual
Lii-402 charger manual
First, warm tips
1. This charger can only charge cylindrical lithium ion battery (3.7V, 3.8V), nickel hydrogen / nickel cadmium, lithium iron phosphate battery;2. Before use, please carefully refer to the instructions, pay attention to the recommended rechargeable battery charging current, do not exceed the recommended current charge;3. Charge with a 5V USB adapter (adapter current recommended 2A);4. Charger charge and discharge may be fever, be careful not to burn;5. When you stop using it, unplug the power and unplug the battery.6. Can only be used in normal room.7. This product test data is for reference only, the actual situation, please refer to professional equipment. Appearance: Second, the charger requirements and functions: 1. Micro USB DC 5V input, two separate charging and microcomputer management system 2. Available for 4 kinds of charging current selection (500mA / 700mA / 1000mA / 2000mA) 2000mA designated fourth slot.3. LED display Charge status 25% 50% 75% 100% and battery type NiMH 1.2V Li-Fe 3.2V Li-ion 3.7V Li-ion 3.85V. 4. Can automatically identify lithium (Li-ion) batteries and nickel-metal hydride (Ni-MH) batteries, manually select the iron phosphate (Liepo4) battery and Li-ion 3.85V battery 5. 0V voltage activation function, 1.65-1.85V can not be charged (but there will be activated current trickle type charge). 6. Have over-charge, short circuit, intelligent identification of bad batteries and reverse battery detection protection. 7. Charging mode, constant current constant pressure 8. Using DC input, the charger power supply for the 5V-2A (Micro plug) 9. With standard 5V / 1000mA USB automatic identification output function,Third, the key, LED and function description1. Press the key: hold the selector key for 2 seconds to switch 500mA 700mA 1000mA 2000mA charge current at power on,When charging the battery, press the select key to change the type of rechargeable battery. When the rechargeable battery type is selected (for example, 3.20V 3.85V) for 5 seconds, enter the charging state.2. LED: charger connected to the 5V power supply, the charger all the LED moment all bright, if the battery is not put into the charging slot, 500mA (LED) indicator light is on, the other lights go out. When the battery is detected, the four LED lights are all bright, 3.7LED light will flash, then press the button to select the type of battery you need to charge, if not selected, 5 seconds into the default identification of the battery charge, charge The indicator light flashes at the corresponding charge ratio. Press the button to check the charge type (no power indication) 5 seconds after the return to the state of charge. When not energized, insert the battery to view the power ratio (5 seconds after extinguishing, need to view again press)USB output indication: When the USB output is detected, the power indicator turns on for 10 seconds and presses to check the power. 4. LED display reference pictureFourth, the electrical technical parameters: 1, input power: Micro USB DC 5V / 2A2, the output voltage: 1.42V4.2V ± 0.05V,3.65 ± 0.05V4.35 ± 0.05V3, the output current: 2000mA * 1 1000mA * 2 700mA * 3 500mA * 44, constant voltage charging, cut-off current: <100m A;5, external power supply standby current: <15.0m A;Five, USB output function:1, USB port output no-load voltage: 4.90-5.30V; specify the fourth slot for the USB output2, the output current: 1000 m A;3, no-load current: <1m A;4, load 1000m A current, the port output voltage: 4.75-5.25V;5, stop output protection voltage: 3.0 ± 0.1V;6, compatible batteries: Li-ion / IMR: 18650, 18490, 18350, 17670, 17500, 16340 (RCR123), 14500, 10440Seven, charger size: 112mm × 90mm × 30mm (length / width / height) Weight: g + g (micro line)Lii-202 This charger is designed for portable, flexible and multi types of battery. It can detect the battery type and charge the battery automatically under your selected charging current. Built-in LED indicators to display the charging status and 5V/100mAh USB output function
Warming:
Lii-100 Charger Product Description:
First, the charger requirements and functions:
1. Using Micro USB DC 5V input, single-slot charging and independent microcomputer management system
2. Available two kinds of charging current selection (500mA / 1000mA)
3. LED displays charge status 25% 50% 75% 100% and battery type NiMH 1.2V Li-Fe 3.0V Li-ion 3.7V Li-ion 3.85V.
4.It can automatically identify the lithium battery (Li-ion) batteries and nickel-metal hydride (Ni-MH) battery, manual selection of iron phosphate treatment (Liepo4) batteries and Li-ion 3.85V battery
5. There 0V voltage activation, 1.6-2.2V not charge (but donations will be activated currents flow pattern charge).
6. There overcharge and over discharge, short circuit, intelligent recognition bad battery detection and reverse battery protection.
(Note: short circuit, bad battery, reverse battery, charger does not work, LED is not lit)
7. Charging mode, constant current constant voltage
8. Using a DC input power for the charger to work 5V-1A (Micro plug)
9. a paragraph: with standard 5V / 1000 mA USB automatic identification output,
b paragraph: No USB output function
Second, the description of the keys, LED and function
1. Press: under power, any time hold down the Select button for 2 seconds each converter 500mA 1000mA charging current;
Powered battery charging, tap Select button to change the type of rechargeable battery, the battery needs to be charged when the selected type (Example 3V 3.85V) 5 seconds to enter the state of charge.
2. LED: charger connected to 5V power supply, charger all LED full brightness instantly, without a battery into the charging slot, 500mA (LED) indicator light, other lights go out.
Upon detection of a battery, four LED lights flashing, then you can tap the button to select the desired type of rechargeable batteries, if you do not choose, five seconds after entering the default recognition of battery charging, charging indicator in accordance with the corresponding power ratio flashes. Tap the button to query the charging pattern (no charge indicator) five seconds after the return to the state of charge. When not energized, insert the battery charge can be viewed ratio (5 seconds and then turns off, you need to view the press again)
USB Output indication: When detected USB output, power indicator lights go out after 10 seconds, the button can view power.
Third, the electrical technical parameters:
1, input power: Micro USB DC 5V / 1A
2, the output voltage: 4.2V ± 1% / 5V
3, the output current: 500mA / 1000mA
4, constant voltage charging, off current: <100m A;
5, the external power supply Standby current: <15.0mA;
Four, USB output function:
1, USB port output load voltage: 4.90-5.30V;
2, the output current: 1000mA
3, no-load current: <1mA;
4, 1000m A load current, the port output voltage: 4.75-5.25V;
5, stop the output protection voltage: 3.0 ± 0.1V;
V. compatible battery:
Li-ion / IMR: 18650, 18490, 18350, 17670, 17500, 16340 (RCR123), 14500, 10440
Charger Dimensions: 113mm × 38mm × 32mm (length / width / height)
Weight: ** g (without battery, power cord)
5V 2A USB head instructions
Input voltage: 100 ~ 240V 50 / 60HZ 0.3A (AC)Output voltage: 5V (DC)Output current: 2000MAOutput socket: USB (standard)Output voltage accuracy: ± 0.3% (no load)Wide input range, high voltage accuracy Built-in IC solution, can play the role of overload protection, please rest assured that use Product performance characteristics:1. Product built-in import management chip;2. Constant current / constant voltage / constant temperature check mode charging, so that the charging current to maximize;3. Can activate the depth of the discharge of the battery and reduce power consumption, the battery voltage is low using a small current precharge mode;4. Power-down automatically enters the low-power sleep mode charge state.Features:1, the charger for the USB output interface, can be used for mobile phone tablet computer equipment without interfering with each other2, the charger USB is 2A, to adapt to a wider range of electronic products3, the charger shell for the ABS fire environmental protection materials, the use of smooth design, effective to prevent scratches to ensure that the beautiful appearance of the product4, the charger built-in IC control protection lines, over-voltage and over-current protection, the maximum protection of charging security, high efficiency, fast5, versatile input design, continuous output voltage, built-in anti-electromagnetic interference filter, pay attention to your simultaneous charging and use your love machine; product color: (black white) color optionalUse: plug the product into the use of USB cable to connect the phone or other digital devices can be used; for type: Apple charger, IPAD charger, iphone charger, universal USB Samsung mobile phone Motorola / Motorola Dopod Soar / Sony Ericsson Nokia Tablet PC : Aino, Onda, cool than the cube, 5 elements, Rainbow, Tsinghua Tongfang, etc. 5V2Ausb interface General Description: USB standard interface for a variety of digital products such as matching fast charge. Special Note: This product has overcharge, overcurrent protection function, according to the size of the battery capacity, charging time length, charging, the battery charger shell is a normal temperature rise is normal, please do not put the poor battery into the charge, so as not to damage charger.Return Policy
If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
Seller Service
On-time Delivery: If you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).Nimh New 16340 3.85v 202 2a 18650 Price Liitokala 3.7v Lii-402 1.2v 100 3.2v Aa/aaa
No comments:
Post a Comment